The G4DNAPTBIonisationModel class Implements the PTB ionisation model. 더 자세히 ...

#include <G4DNAPTBIonisationModel.hh>

G4DNAPTBIonisationModel에 대한 상속 다이어그램 :

Public 멤버 함수
	G4DNAPTBIonisationModel (const G4String &applyToMaterial="all", const G4ParticleDefinition *p=0, const G4String &nam="DNAPTBIonisationModel", const G4bool isAuger=true)
	G4DNAPTBIonisationModel Constructor. 더 자세히 ...

virtual	~G4DNAPTBIonisationModel ()
	~G4DNAPTBIonisationModel Destructor 더 자세히 ...

virtual void	Initialise (const G4ParticleDefinition particle, const G4DataVector &=(new G4DataVector()), G4ParticleChangeForGamma *fpChangeForGamme=nullptr)
	Initialise Method called once at the beginning of the simulation. It is used to setup the list of the materials managed by the model and the energy limits. All the materials are setup but only a part of them can be activated by the user through the constructor. 더 자세히 ...

virtual G4double	CrossSectionPerVolume (const G4Material material, const G4String &materialName, const G4ParticleDefinition p, G4double ekin, G4double emin, G4double emax)
	CrossSectionPerVolume Mandatory for every model the CrossSectionPerVolume method is in charge of returning the cross section value corresponding to the material, particle and energy current values. 더 자세히 ...

virtual void	SampleSecondaries (std::vector< G4DynamicParticle * > , const G4MaterialCutsCouple , const G4String &materialName, const G4DynamicParticle , G4ParticleChangeForGamma particleChangeForGamma, G4double tmin, G4double tmax)
	SampleSecondaries If the model is selected for the ModelInterface then SampleSecondaries will be called. The method sets the characteristics of the particles implied with the physical process after the ModelInterface (energy, momentum...). This method is mandatory for every model. 더 자세히 ...

G4bool	IsMaterialDefine (const G4String &materialName)
	IsMaterialDefine Check if the given material is defined in the simulation. 더 자세히 ...

G4bool	IsMaterialExistingInModel (const G4String &materialName)
	IsMaterialExistingInModel Check if the given material is defined in the current model class. 더 자세히 ...

G4bool	IsParticleExistingInModelForMaterial (const G4String &particleName, const G4String &materialName)
	IsParticleExistingInModelForMaterial To check two things: 1- is the material existing in model ? 2- if yes, is the particle defined for that material ? 더 자세히 ...

G4String	GetName ()
	GetName. 더 자세히 ...

G4double	GetHighELimit (const G4String &material, const G4String &particle)
	GetHighEnergyLimit. 더 자세히 ...

G4double	GetLowELimit (const G4String &material, const G4String &particle)
	GetLowEnergyLimit. 더 자세히 ...

void	SetHighELimit (const G4String &material, const G4String &particle, G4double lim)
	SetHighEnergyLimit. 더 자세히 ...

void	SetLowELimit (const G4String &material, const G4String &particle, G4double lim)
	SetLowEnergyLimit. 더 자세히 ...

Protected 타입
typedef std::map< G4String, std::map< G4String, G4DNACrossSectionDataSet *, std::less< G4String > > >	TableMapData

typedef std::map< G4String, std::map< G4String, G4double > >	RatioMapData

typedef std::map< G4String, G4double >::const_iterator	ItCompoMapData

Protected 멤버 함수
TableMapData *	GetTableData ()
	GetTableData. 더 자세히 ...

std::vector< G4String >	BuildApplyToMatVect (const G4String &materials)
	BuildApplyToMatVect Build the material name vector which is used to know the materials the user want to include in the model. 더 자세히 ...

void	ReadAndSaveCSFile (const G4String &materialName, const G4String &particleName, const G4String &file, G4double scaleFactor)
	ReadAndSaveCSFile Read and save a "simple" cross section file : use of G4DNACrossSectionDataSet->loadData() 더 자세히 ...

G4int	RandomSelectShell (G4double k, const G4String &particle, const G4String &materialName)
	RandomSelectShell Method to randomely select a shell from the data table uploaded. The size of the table (number of columns) is used to determine the total number of possible shells. 더 자세히 ...

void	AddCrossSectionData (G4String materialName, G4String particleName, G4String fileCS, G4String fileDiffCS, G4double scaleFactor)
	AddCrossSectionData Method used during the initialization of the model class to add a new material. It adds a material to the model and fills vectors with informations. 더 자세히 ...

void	AddCrossSectionData (G4String materialName, G4String particleName, G4String fileCS, G4double scaleFactor)
	AddCrossSectionData Method used during the initialization of the model class to add a new material. It adds a material to the model and fills vectors with informations. Not every model needs differential cross sections. 더 자세히 ...

void	LoadCrossSectionData (const G4String &particleName)
	LoadCrossSectionData Method to loop on all the registered materials in the model and load the corresponding data. 더 자세히 ...

void	EnableForMaterialAndParticle (const G4String &materialName, const G4String &particleName)
	EnableMaterialAndParticle. 더 자세히 ...

Private 타입
typedef std::map< G4String, std::map< G4String, std::map < double, std::map< double, std::map< double, double > > > > >	TriDimensionMap

typedef std::map< G4String, std::map< G4String, std::map < double, std::vector< double > > > >	VecMap

typedef std::map< G4String, std::map< G4String, std::map < double, std::map< double, std::vector< double > > > > >	VecMapWithShell

Private 멤버 함수
G4double	RandomizeEjectedElectronEnergy (G4ParticleDefinition *aParticleDefinition, G4double incomingParticleEnergy, G4int shell, const G4String &materialName)

double	DifferentialCrossSection (G4ParticleDefinition *aParticleDefinition, G4double k, G4double energyTransfer, G4int shell, const G4String &materialName)

G4double	RandomizeEjectedElectronEnergyFromCumulated (G4ParticleDefinition *particleDefinition, G4double k, G4int shell, const G4String &materialName)
	RandomizeEjectedElectronEnergyFromCumulated Uses the cumulated tables to find the energy of the ejected particle (electron) 더 자세히 ...

void	RandomizeEjectedElectronDirection (G4ParticleDefinition *aParticleDefinition, G4double incomingParticleEnergy, G4double outgoingParticleEnergy, G4double &cosTheta, G4double &phi)
	RandomizeEjectedElectronDirection Method to calculate the ejected electron direction. 더 자세히 ...

void	ReadDiffCSFile (const G4String &materialName, const G4String &particleName, const G4String &file, const G4double scaleFactor)
	ReadDiffCSFile Method to read the differential cross section files. 더 자세히 ...

G4double	QuadInterpolator (G4double e11, G4double e12, G4double e21, G4double e22, G4double xs11, G4double xs12, G4double xs21, G4double xs22, G4double t1, G4double t2, G4double t, G4double e)
	QuadInterpolator. 더 자세히 ...

G4double	LogLogInterpolate (G4double e1, G4double e2, G4double e, G4double xs1, G4double xs2)
	LogLogInterpolate. 더 자세히 ...

	G4DNAPTBIonisationModel (const G4DNAPTBIonisationModel &)

G4DNAPTBIonisationModel &	operator= (const G4DNAPTBIonisationModel &right)

Private 속성
G4DNAPTBAugerModel *	fDNAPTBAugerModel
	PTB Auger model instanciated in the constructor and deleted in the destructor of the class. 더 자세히 ...

G4int	verboseLevel
	verbose level 더 자세히 ...

G4DNAPTBIonisationStructure	ptbStructure

TriDimensionMap	diffCrossSectionData

TriDimensionMap	fEnergySecondaryData

std::map< G4String, std::map < G4String, std::vector < double > > >	fTMapWithVec

VecMap	fEMapWithVector

VecMapWithShell	fProbaShellMap

상세한 설명

The G4DNAPTBIonisationModel class Implements the PTB ionisation model.

G4DNAPTBIonisationModel.hh 파일의 53 번째 라인에서 정의되었습니다.

멤버 타입정의 문서화

typedef std::map<G4String, G4double>::const_iterator G4VDNAModel::ItCompoMapData

protectedinherited

G4VDNAModel.hh 파일의 185 번째 라인에서 정의되었습니다.

typedef std::map<G4String,std::map<G4String, G4double> > G4VDNAModel::RatioMapData

protectedinherited

G4VDNAModel.hh 파일의 184 번째 라인에서 정의되었습니다.

typedef std::map<G4String, std::map<G4String,G4DNACrossSectionDataSet*,std::less<G4String> > > G4VDNAModel::TableMapData

protectedinherited

G4VDNAModel.hh 파일의 183 번째 라인에서 정의되었습니다.

typedef std::map<G4String, std::map<G4String, std::map<double, std::map<double, std::map<double, double> > > > > G4DNAPTBIonisationModel::TriDimensionMap

private

G4DNAPTBIonisationModel.hh 파일의 130 번째 라인에서 정의되었습니다.

typedef std::map<G4String, std::map<G4String, std::map<double, std::vector<double> > > > G4DNAPTBIonisationModel::VecMap

private

G4DNAPTBIonisationModel.hh 파일의 134 번째 라인에서 정의되었습니다.

typedef std::map<G4String, std::map<G4String, std::map<double, std::map<double, std::vector<double> > > > > G4DNAPTBIonisationModel::VecMapWithShell

private

G4DNAPTBIonisationModel.hh 파일의 136 번째 라인에서 정의되었습니다.

생성자 & 소멸자 문서화

G4DNAPTBIonisationModel::G4DNAPTBIonisationModel	(	const G4String &	applyToMaterial = `"all"`,
		const G4ParticleDefinition *	p = `0`,
		const G4String &	nam = `"DNAPTBIonisationModel"`,
		const G4bool	isAuger = `true`
	)

G4DNAPTBIonisationModel Constructor.

매개변수

applyToMaterial
p
nam
isAuger

G4DNAPTBIonisationModel.cc 파일의 38 번째 라인에서 정의되었습니다.

다음을 참조함 : fDNAPTBAugerModel, G4cout, G4endl, verboseLevel.

G4DNAPTBIonisationModel::~G4DNAPTBIonisationModel ( )

virtual

~G4DNAPTBIonisationModel Destructor

G4DNAPTBIonisationModel.cc 파일의 70 번째 라인에서 정의되었습니다.

다음을 참조함 : fDNAPTBAugerModel.

G4DNAPTBIonisationModel::G4DNAPTBIonisationModel ( const G4DNAPTBIonisationModel & )

private

멤버 함수 문서화

void G4VDNAModel::AddCrossSectionData	(	G4String	materialName,
		G4String	particleName,
		G4String	fileCS,
		G4String	fileDiffCS,
		G4double	scaleFactor
	)

protectedinherited

AddCrossSectionData Method used during the initialization of the model class to add a new material. It adds a material to the model and fills vectors with informations.

매개변수

materialName
particleName
fileCS
fileDiffCS
scaleFactor

G4VDNAModel.cc 파일의 58 번째 라인에서 정의되었습니다.

다음을 참조함 : G4VDNAModel::fModelCSFiles, G4VDNAModel::fModelDiffCSFiles, G4VDNAModel::fModelMaterials, G4VDNAModel::fModelParticles, G4VDNAModel::fModelScaleFactors.

다음에 의해서 참조됨 : G4DNAPTBExcitationModel::Initialise(), G4DNAPTBElasticModel::Initialise(), Initialise().

void G4VDNAModel::AddCrossSectionData	(	G4String	materialName,
		G4String	particleName,
		G4String	fileCS,
		G4double	scaleFactor
	)

protectedinherited

AddCrossSectionData Method used during the initialization of the model class to add a new material. It adds a material to the model and fills vectors with informations. Not every model needs differential cross sections.

매개변수

materialName
particleName
fileCS
scaleFactor

G4VDNAModel.cc 파일의 67 번째 라인에서 정의되었습니다.

다음을 참조함 : G4VDNAModel::fModelCSFiles, G4VDNAModel::fModelMaterials, G4VDNAModel::fModelParticles, G4VDNAModel::fModelScaleFactors.

std::vector< G4String > G4VDNAModel::BuildApplyToMatVect ( const G4String & materials )

protectedinherited

BuildApplyToMatVect Build the material name vector which is used to know the materials the user want to include in the model.

매개변수

materials

반환값: a vector with all the material names

G4VDNAModel.cc 파일의 139 번째 라인에서 정의되었습니다.

다음을 참조함 : mat.

다음에 의해서 참조됨 : G4VDNAModel::LoadCrossSectionData().

G4double G4DNAPTBIonisationModel::CrossSectionPerVolume	(	const G4Material *	material,
		const G4String &	materialName,
		const G4ParticleDefinition *	p,
		G4double	ekin,
		G4double	emin,
		G4double	emax
	)

virtual

CrossSectionPerVolume Mandatory for every model the CrossSectionPerVolume method is in charge of returning the cross section value corresponding to the material, particle and energy current values.

매개변수

material
materialName
p
ekin
emin
emax

반환값: the cross section value

G4VDNAModel를 구현.

G4DNAPTBIonisationModel.cc 파일의 250 번째 라인에서 정의되었습니다.

다음을 참조함 : cm, eV, G4cout, G4endl, G4VDNAModel::GetHighELimit(), G4VDNAModel::GetLowELimit(), G4ParticleDefinition::GetParticleName(), G4VDNAModel::GetTableData(), verboseLevel.

double G4DNAPTBIonisationModel::DifferentialCrossSection	(	G4ParticleDefinition *	aParticleDefinition,
		G4double	k,
		G4double	energyTransfer,
		G4int	shell,
		const G4String &	materialName
	)

private

G4DNAPTBIonisationModel.cc 파일의 673 번째 라인에서 정의되었습니다.

다음을 참조함 : diffCrossSectionData, G4Electron::ElectronDefinition(), fEMapWithVector, fTMapWithVec, G4ParticleDefinition::GetParticleName(), G4DNAPTBIonisationStructure::IonisationEnergy(), G4Proton::ProtonDefinition(), ptbStructure, QuadInterpolator(), t1, t2.

다음에 의해서 참조됨 : RandomizeEjectedElectronEnergy().

void G4VDNAModel::EnableForMaterialAndParticle	(	const G4String &	materialName,
		const G4String &	particleName
	)

protectedinherited

EnableMaterialAndParticle.

매개변수

materialName
particleName	Meant to fill fTableData with 0 for the specified material and particle, therefore allowing the ModelInterface class to proceed with the material and particle even if no data are registered here. The data should obviously be registered somewhere in the child class. This method is here to allow an easy use of the no-ModelInterface dna models within the ModelInterface system.

G4VDNAModel.cc 파일의 134 번째 라인에서 정의되었습니다.

다음을 참조함 : G4VDNAModel::fTableData.

다음에 의해서 참조됨 : G4DNADummyModel::Initialise(), G4DNAVacuumModel::Initialise().

G4double G4VDNAModel::GetHighELimit	(	const G4String &	material,
		const G4String &	particle
	)

inlineinherited

GetHighEnergyLimit.

매개변수

material
particle

반환값: fHighEnergyLimits[material][particle]

G4VDNAModel.hh 파일의 153 번째 라인에서 정의되었습니다.

다음을 참조함 : G4VDNAModel::fHighEnergyLimits.

다음에 의해서 참조됨 : G4DNAPTBExcitationModel::CrossSectionPerVolume(), G4DNAPTBElasticModel::CrossSectionPerVolume(), CrossSectionPerVolume(), G4DNAPTBElasticModel::SampleSecondaries(), SampleSecondaries().

G4double G4VDNAModel::GetLowELimit	(	const G4String &	material,
		const G4String &	particle
	)

inlineinherited

GetLowEnergyLimit.

매개변수

material
particle

반환값: fLowEnergyLimits[material][particle]

G4VDNAModel.hh 파일의 161 번째 라인에서 정의되었습니다.

다음을 참조함 : G4VDNAModel::fLowEnergyLimits.

다음에 의해서 참조됨 : G4DNAPTBExcitationModel::CrossSectionPerVolume(), G4DNAPTBElasticModel::CrossSectionPerVolume(), CrossSectionPerVolume(), G4DNAPTBElasticModel::SampleSecondaries(), SampleSecondaries().

G4String G4VDNAModel::GetName ( void )

inlineinherited

GetName.

반환값: the name of the model

G4VDNAModel.hh 파일의 145 번째 라인에서 정의되었습니다.

다음을 참조함 : G4VDNAModel::fName.

다음에 의해서 참조됨 : G4VDNAModel::IsMaterialDefine().

TableMapData* G4VDNAModel::GetTableData ( )

inlineprotectedinherited

GetTableData.

반환값: a pointer to a map with the following structure: [materialName][particleName]=G4DNACrossSectionDataSet*

G4VDNAModel.hh 파일의 193 번째 라인에서 정의되었습니다.

다음을 참조함 : G4VDNAModel::fTableData.

다음에 의해서 참조됨 : G4DNAPTBExcitationModel::CrossSectionPerVolume(), G4DNAPTBElasticModel::CrossSectionPerVolume(), CrossSectionPerVolume(), G4VDNAModel::RandomSelectShell().

void G4DNAPTBIonisationModel::Initialise	(	const G4ParticleDefinition *	particle,
		const G4DataVector &	= `*(new G4DataVector())`,
		G4ParticleChangeForGamma *	fpChangeForGamme = `nullptr`
	)

virtual

Initialise Method called once at the beginning of the simulation. It is used to setup the list of the materials managed by the model and the energy limits. All the materials are setup but only a part of them can be activated by the user through the constructor.

G4VDNAModel를 구현.

G4DNAPTBIonisationModel.cc 파일의 78 번째 라인에서 정의되었습니다.

다음을 참조함 : G4VDNAModel::AddCrossSectionData(), cm, e, G4Electron::ElectronDefinition(), eV, fDNAPTBAugerModel, G4cout, G4endl, G4ParticleDefinition::GetParticleName(), G4DNAPTBAugerModel::Initialise(), keV, G4VDNAModel::LoadCrossSectionData(), m, MeV, G4Proton::ProtonDefinition(), G4VDNAModel::SetHighELimit(), G4VDNAModel::SetLowELimit(), verboseLevel.

G4bool G4VDNAModel::IsMaterialDefine ( const G4String & materialName )

inherited

IsMaterialDefine Check if the given material is defined in the simulation.

매개변수

materialName

반환값: true if the material is defined in the simulation

G4VDNAModel.cc 파일의 237 번째 라인에서 정의되었습니다.

다음을 참조함 : G4Material::GetMaterialTable(), G4VDNAModel::GetName().

G4bool G4VDNAModel::IsMaterialExistingInModel ( const G4String & materialName )

inherited

IsMaterialExistingInModel Check if the given material is defined in the current model class.

매개변수

materialName

반환값: true if the material is defined in the model

G4VDNAModel.cc 파일의 257 번째 라인에서 정의되었습니다.

다음을 참조함 : G4VDNAModel::fTableData.

다음에 의해서 참조됨 : G4VDNAModel::IsParticleExistingInModelForMaterial().

G4bool G4VDNAModel::IsParticleExistingInModelForMaterial	(	const G4String &	particleName,
		const G4String &	materialName
	)

inherited

IsParticleExistingInModelForMaterial To check two things: 1- is the material existing in model ? 2- if yes, is the particle defined for that material ?

매개변수

particleName
materialName

반환값: true if the particle/material couple is defined in the model

G4VDNAModel.cc 파일의 271 번째 라인에서 정의되었습니다.

다음을 참조함 : G4VDNAModel::fTableData, G4VDNAModel::IsMaterialExistingInModel().

void G4VDNAModel::LoadCrossSectionData ( const G4String & particleName )

protectedinherited

LoadCrossSectionData Method to loop on all the registered materials in the model and load the corresponding data.

G4VDNAModel.cc 파일의 75 번째 라인에서 정의되었습니다.

다음을 참조함 : G4VDNAModel::BuildApplyToMatVect(), FatalException, G4VDNAModel::fModelCSFiles, G4VDNAModel::fModelDiffCSFiles, G4VDNAModel::fModelMaterials, G4VDNAModel::fModelParticles, G4VDNAModel::fModelScaleFactors, G4VDNAModel::fStringOfMaterials, G4Exception(), G4VDNAModel::ReadAndSaveCSFile(), G4VDNAModel::ReadDiffCSFile().

다음에 의해서 참조됨 : G4DNAPTBExcitationModel::Initialise(), G4DNAPTBElasticModel::Initialise(), Initialise().

G4double G4DNAPTBIonisationModel::LogLogInterpolate	(	G4double	e1,
		G4double	e2,
		G4double	e,
		G4double	xs1,
		G4double	xs2
	)

private

LogLogInterpolate.

매개변수

e1
e2
e
xs1
xs2

반환값: the interpolate value

G4DNAPTBIonisationModel.cc 파일의 939 번째 라인에서 정의되었습니다.

다음을 참조함 : d1, d2.

다음에 의해서 참조됨 : QuadInterpolator().

G4DNAPTBIonisationModel& G4DNAPTBIonisationModel::operator= ( const G4DNAPTBIonisationModel & right )

private

G4double G4DNAPTBIonisationModel::QuadInterpolator	(	G4double	e11,
		G4double	e12,
		G4double	e21,
		G4double	e22,
		G4double	xs11,
		G4double	xs12,
		G4double	xs21,
		G4double	xs22,
		G4double	t1,
		G4double	t2,
		G4double	t,
		G4double	e
	)

private

QuadInterpolator.

매개변수

e11
e12
e21
e22
xs11
xs12
xs21
xs22
t1
t2
t
e

반환값: the interpolated value

G4DNAPTBIonisationModel.cc 파일의 971 번째 라인에서 정의되었습니다.

다음을 참조함 : LogLogInterpolate().

다음에 의해서 참조됨 : DifferentialCrossSection(), RandomizeEjectedElectronEnergyFromCumulated().

void G4DNAPTBIonisationModel::RandomizeEjectedElectronDirection	(	G4ParticleDefinition *	aParticleDefinition,
		G4double	incomingParticleEnergy,
		G4double	outgoingParticleEnergy,
		G4double &	cosTheta,
		G4double &	phi
	)

private

RandomizeEjectedElectronDirection Method to calculate the ejected electron direction.

매개변수

aParticleDefinition
incomingParticleEnergy
outgoingParticleEnergy
cosTheta
phi

G4DNAPTBIonisationModel.cc 파일의 634 번째 라인에서 정의되었습니다.

다음을 참조함 : CLHEP::electron_mass_c2, G4Electron::ElectronDefinition(), eV, G4UniformRand, CLHEP::proton_mass_c2, G4Proton::ProtonDefinition(), twopi.

다음에 의해서 참조됨 : SampleSecondaries().

G4double G4DNAPTBIonisationModel::RandomizeEjectedElectronEnergy	(	G4ParticleDefinition *	aParticleDefinition,
		G4double	incomingParticleEnergy,
		G4int	shell,
		const G4String &	materialName
	)

private

G4DNAPTBIonisationModel.cc 파일의 537 번째 라인에서 정의되었습니다.

다음을 참조함 : DifferentialCrossSection(), CLHEP::electron_mass_c2, G4Electron::ElectronDefinition(), eV, G4UniformRand, G4DNAPTBIonisationStructure::IonisationEnergy(), CLHEP::proton_mass_c2, G4Proton::ProtonDefinition(), ptbStructure.

다음에 의해서 참조됨 : SampleSecondaries().

G4double G4DNAPTBIonisationModel::RandomizeEjectedElectronEnergyFromCumulated	(	G4ParticleDefinition *	particleDefinition,
		G4double	k,
		G4int	shell,
		const G4String &	materialName
	)

private

RandomizeEjectedElectronEnergyFromCumulated Uses the cumulated tables to find the energy of the ejected particle (electron)

매개변수

particleDefinition
k
shell
materialName

반환값: the ejected electron energy

G4DNAPTBIonisationModel.cc 파일의 772 번째 라인에서 정의되었습니다.

다음을 참조함 : G4InuclSpecialFunctions::bindingEnergy(), eV, fEnergySecondaryData, fProbaShellMap, fTMapWithVec, G4cerr, G4cout, G4endl, G4UniformRand, G4ParticleDefinition::GetParticleName(), G4DNAPTBIonisationStructure::IonisationEnergy(), ptbStructure, QuadInterpolator().

다음에 의해서 참조됨 : SampleSecondaries().

G4int G4VDNAModel::RandomSelectShell	(	G4double	k,
		const G4String &	particle,
		const G4String &	materialName
	)

protectedinherited

RandomSelectShell Method to randomely select a shell from the data table uploaded. The size of the table (number of columns) is used to determine the total number of possible shells.

매개변수

k
particle
materialName

반환값: the selected shell

G4VDNAModel.cc 파일의 182 번째 라인에서 정의되었습니다.

다음을 참조함 : FatalException, G4VEMDataSet::FindValue(), G4Exception(), G4UniformRand, G4DNACrossSectionDataSet::GetComponent(), G4VDNAModel::GetTableData(), n, G4DNACrossSectionDataSet::NumberOfComponents(), pos.

다음에 의해서 참조됨 : G4DNAPTBExcitationModel::SampleSecondaries(), SampleSecondaries().

void G4VDNAModel::ReadAndSaveCSFile	(	const G4String &	materialName,
		const G4String &	particleName,
		const G4String &	file,
		G4double	scaleFactor
	)

protectedinherited

ReadAndSaveCSFile Read and save a "simple" cross section file : use of G4DNACrossSectionDataSet->loadData()

매개변수

materialName
particleName
file
scaleFactor

G4VDNAModel.cc 파일의 174 번째 라인에서 정의되었습니다.

다음을 참조함 : eV, G4VDNAModel::fTableData.

다음에 의해서 참조됨 : G4VDNAModel::LoadCrossSectionData().

void G4DNAPTBIonisationModel::ReadDiffCSFile	(	const G4String &	materialName,
		const G4String &	particleName,
		const G4String &	file,
		const G4double	scaleFactor
	)

privatevirtual

ReadDiffCSFile Method to read the differential cross section files.

매개변수

materialName
particleName
file
scaleFactor

G4VDNAModel(으)로부터 재구현되었습니다.

G4DNAPTBIonisationModel.cc 파일의 432 번째 라인에서 정의되었습니다.

다음을 참조함 : diffCrossSectionData, E, FatalException, fEMapWithVector, fEnergySecondaryData, file, fProbaShellMap, fTMapWithVec, G4Exception(), G4DNAPTBIonisationStructure::NumberOfLevels(), ptbStructure.

void G4DNAPTBIonisationModel::SampleSecondaries	(	std::vector< G4DynamicParticle * > *	fvect,
		const G4MaterialCutsCouple *	,
		const G4String &	materialName,
		const G4DynamicParticle *	aDynamicParticle,
		G4ParticleChangeForGamma *	particleChangeForGamma,
		G4double	tmin,
		G4double	tmax
	)

virtual

SampleSecondaries If the model is selected for the ModelInterface then SampleSecondaries will be called. The method sets the characteristics of the particles implied with the physical process after the ModelInterface (energy, momentum...). This method is mandatory for every model.

매개변수