ExN03DetectorMessenger.cc

이 파일의 문서화 페이지로 가기

//
// ********************************************************************
// * License and Disclaimer                                           *
// *                                                                  *
// * The  Geant4 software  is  copyright of the Copyright Holders  of *
// * the Geant4 Collaboration.  It is provided  under  the terms  and *
// * conditions of the Geant4 Software License,  included in the file *
// * LICENSE and available at  http://cern.ch/geant4/license .  These *
// * include a list of copyright holders.                             *
// *                                                                  *
// * Neither the authors of this software system, nor their employing *
// * institutes,nor the agencies providing financial support for this *
// * work  make  any representation or  warranty, express or implied, *
// * regarding  this  software system or assume any liability for its *
// * use.  Please see the license in the file  LICENSE  and URL above *
// * for the full disclaimer and the limitation of liability.         *
// *                                                                  *
// * This  code  implementation is the result of  the  scientific and *
// * technical work of the GEANT4 collaboration.                      *
// * By using,  copying,  modifying or  distributing the software (or *
// * any work based  on the software)  you  agree  to acknowledge its *
// * use  in  resulting  scientific  publications,  and indicate your *
// * acceptance of all terms of the Geant4 Software license.          *
// ********************************************************************
//
//
// $Id: ExN03DetectorMessenger.cc 66892 2013-01-17 10:57:59Z gunter $
//
// 

//....oooOO0OOooo........oooOO0OOooo........oooOO0OOooo........oooOO0OOooo......
//....oooOO0OOooo........oooOO0OOooo........oooOO0OOooo........oooOO0OOooo......

#include "ExN03DetectorMessenger.hh"

#include "ExN03DetectorConstruction.hh"
#include "G4UIdirectory.hh"
#include "G4UIcmdWithAString.hh"
#include "G4UIcmdWithAnInteger.hh"
#include "G4UIcmdWithADoubleAndUnit.hh"
#include "G4UIcmdWithoutParameter.hh"

//....oooOO0OOooo........oooOO0OOooo........oooOO0OOooo........oooOO0OOooo......

ExN03DetectorMessenger::ExN03DetectorMessenger(
                                           ExN03DetectorConstruction* ExN03Det)
:ExN03Detector(ExN03Det)
{ 
  N03Dir = new G4UIdirectory("/N03/");
  N03Dir->SetGuidance("UI commands of this example");
  
  detDir = new G4UIdirectory("/N03/det/");
  detDir->SetGuidance("detector control");
       
  AbsMaterCmd = new G4UIcmdWithAString("/N03/det/setAbsMat",this);
  AbsMaterCmd->SetGuidance("Select Material of the Absorber.");
  AbsMaterCmd->SetParameterName("choice",false);
  AbsMaterCmd->AvailableForStates(G4State_PreInit,G4State_Idle);
  
  GapMaterCmd = new G4UIcmdWithAString("/N03/det/setGapMat",this);
  GapMaterCmd->SetGuidance("Select Material of the Gap.");
  GapMaterCmd->SetParameterName("choice",false);
  GapMaterCmd->AvailableForStates(G4State_PreInit,G4State_Idle);
    
  AbsThickCmd = new G4UIcmdWithADoubleAndUnit("/N03/det/setAbsThick",this);
  AbsThickCmd->SetGuidance("Set Thickness of the Absorber");
  AbsThickCmd->SetParameterName("Size",false);
  AbsThickCmd->SetRange("Size>=0.");
  AbsThickCmd->SetUnitCategory("Length");
  AbsThickCmd->AvailableForStates(G4State_PreInit,G4State_Idle);
  
  GapThickCmd = new G4UIcmdWithADoubleAndUnit("/N03/det/setGapThick",this);
  GapThickCmd->SetGuidance("Set Thickness of the Gap");
  GapThickCmd->SetParameterName("Size",false);
  GapThickCmd->SetRange("Size>=0.");
  GapThickCmd->SetUnitCategory("Length");  
  GapThickCmd->AvailableForStates(G4State_PreInit,G4State_Idle);
  
  SizeYZCmd = new G4UIcmdWithADoubleAndUnit("/N03/det/setSizeYZ",this);
  SizeYZCmd->SetGuidance("Set tranverse size of the calorimeter");
  SizeYZCmd->SetParameterName("Size",false);
  SizeYZCmd->SetRange("Size>0.");
  SizeYZCmd->SetUnitCategory("Length");    
  SizeYZCmd->AvailableForStates(G4State_PreInit,G4State_Idle);
  
  NbLayersCmd = new G4UIcmdWithAnInteger("/N03/det/setNbOfLayers",this);
  NbLayersCmd->SetGuidance("Set number of layers.");
  NbLayersCmd->SetParameterName("NbLayers",false);
  NbLayersCmd->SetRange("NbLayers>0 && NbLayers<500");
  NbLayersCmd->AvailableForStates(G4State_PreInit,G4State_Idle);

  UpdateCmd = new G4UIcmdWithoutParameter("/N03/det/update",this);
  UpdateCmd->SetGuidance("Update calorimeter geometry.");
  UpdateCmd->SetGuidance("This command MUST be applied before \"beamOn\" ");
  UpdateCmd->SetGuidance("if you changed geometrical value(s).");
  UpdateCmd->AvailableForStates(G4State_Idle);
      
  MagFieldCmd = new G4UIcmdWithADoubleAndUnit("/N03/det/setField",this);  
  MagFieldCmd->SetGuidance("Define magnetic field.");
  MagFieldCmd->SetGuidance("Magnetic field will be in Z direction.");
  MagFieldCmd->SetParameterName("Bz",false);
  MagFieldCmd->SetUnitCategory("Magnetic flux density");
  MagFieldCmd->AvailableForStates(G4State_PreInit,G4State_Idle);  
}

//....oooOO0OOooo........oooOO0OOooo........oooOO0OOooo........oooOO0OOooo......

ExN03DetectorMessenger::~ExN03DetectorMessenger()
{
  delete NbLayersCmd;
  delete AbsMaterCmd; delete GapMaterCmd;
  delete AbsThickCmd; delete GapThickCmd;
  delete SizeYZCmd;   delete UpdateCmd;
  delete MagFieldCmd;
  delete detDir;
  delete N03Dir;  
}

//....oooOO0OOooo........oooOO0OOooo........oooOO0OOooo........oooOO0OOooo......

void ExN03DetectorMessenger::SetNewValue(G4UIcommand* command,G4String newValue)
{ 
  if( command == AbsMaterCmd )
   { ExN03Detector->SetAbsorberMaterial(newValue);}
   
  if( command == GapMaterCmd )
   { ExN03Detector->SetGapMaterial(newValue);}
  
  if( command == AbsThickCmd )
   { ExN03Detector->SetAbsorberThickness(AbsThickCmd
                                               ->GetNewDoubleValue(newValue));}
   
  if( command == GapThickCmd )
   { ExN03Detector->SetGapThickness(GapThickCmd->GetNewDoubleValue(newValue));}
   
  if( command == SizeYZCmd )
   { ExN03Detector->SetCalorSizeYZ(SizeYZCmd->GetNewDoubleValue(newValue));}
   
  if( command == NbLayersCmd )
   { ExN03Detector->SetNbOfLayers(NbLayersCmd->GetNewIntValue(newValue));}
  
  if( command == UpdateCmd )
   { ExN03Detector->UpdateGeometry(); }

  if( command == MagFieldCmd )
   { ExN03Detector->SetMagField(MagFieldCmd->GetNewDoubleValue(newValue));}
}

//....oooOO0OOooo........oooOO0OOooo........oooOO0OOooo........oooOO0OOooo......