examples/extended/analysis/AnaEx01/shared/src/DetectorMessenger.cc

이 파일의 문서화 페이지로 가기

//
// ********************************************************************
// * License and Disclaimer                                           *
// *                                                                  *
// * The  Geant4 software  is  copyright of the Copyright Holders  of *
// * the Geant4 Collaboration.  It is provided  under  the terms  and *
// * conditions of the Geant4 Software License,  included in the file *
// * LICENSE and available at  http://cern.ch/geant4/license .  These *
// * include a list of copyright holders.                             *
// *                                                                  *
// * Neither the authors of this software system, nor their employing *
// * institutes,nor the agencies providing financial support for this *
// * work  make  any representation or  warranty, express or implied, *
// * regarding  this  software system or assume any liability for its *
// * use.  Please see the license in the file  LICENSE  and URL above *
// * for the full disclaimer and the limitation of liability.         *
// *                                                                  *
// * This  code  implementation is the result of  the  scientific and *
// * technical work of the GEANT4 collaboration.                      *
// * By using,  copying,  modifying or  distributing the software (or *
// * any work based  on the software)  you  agree  to acknowledge its *
// * use  in  resulting  scientific  publications,  and indicate your *
// * acceptance of all terms of the Geant4 Software license.          *
// ********************************************************************
//
//
//
// $Id: DetectorMessenger.cc 98241 2016-07-04 16:56:59Z gcosmo $
//
// 

//....oooOO0OOooo........oooOO0OOooo........oooOO0OOooo........oooOO0OOooo......
//....oooOO0OOooo........oooOO0OOooo........oooOO0OOooo........oooOO0OOooo......

#include "DetectorMessenger.hh"

#include "DetectorConstruction.hh"
#include "G4UIdirectory.hh"
#include "G4UIcmdWithAString.hh"
#include "G4UIcmdWithAnInteger.hh"
#include "G4UIcmdWithADoubleAndUnit.hh"
#include "G4UIcmdWithoutParameter.hh"

//....oooOO0OOooo........oooOO0OOooo........oooOO0OOooo........oooOO0OOooo......

DetectorMessenger::DetectorMessenger( DetectorConstruction* Det)
: G4UImessenger(),
 fDetector(Det),
 fN03Dir(0),
 fDetDir(0),
 fAbsMaterCmd(0),
 fGapMaterCmd(0),
 fAbsThickCmd(0),
 fGapThickCmd(0),
 fSizeYZCmd(0),
 fNbLayersCmd(0)    
{ 
  fN03Dir = new G4UIdirectory("/N03/");
  fN03Dir->SetGuidance("UI commands of this example");
  
  G4bool broadcast = false;
  fDetDir = new G4UIdirectory("/N03/det/",broadcast);
  fDetDir->SetGuidance("detector control");
       
  fAbsMaterCmd = new G4UIcmdWithAString("/N03/det/setAbsMat",this);
  fAbsMaterCmd->SetGuidance("Select Material of the Absorber.");
  fAbsMaterCmd->SetParameterName("choice",false);
  fAbsMaterCmd->AvailableForStates(G4State_PreInit,G4State_Idle);
  
  fGapMaterCmd = new G4UIcmdWithAString("/N03/det/setGapMat",this);
  fGapMaterCmd->SetGuidance("Select Material of the Gap.");
  fGapMaterCmd->SetParameterName("choice",false);
  fGapMaterCmd->AvailableForStates(G4State_PreInit,G4State_Idle);
    
  fAbsThickCmd = new G4UIcmdWithADoubleAndUnit("/N03/det/setAbsThick",this);
  fAbsThickCmd->SetGuidance("Set Thickness of the Absorber");
  fAbsThickCmd->SetParameterName("Size",false);
  fAbsThickCmd->SetRange("Size>=0.");
  fAbsThickCmd->SetUnitCategory("Length");
  fAbsThickCmd->AvailableForStates(G4State_PreInit,G4State_Idle);
  
  fGapThickCmd = new G4UIcmdWithADoubleAndUnit("/N03/det/setGapThick",this);
  fGapThickCmd->SetGuidance("Set Thickness of the Gap");
  fGapThickCmd->SetParameterName("Size",false);
  fGapThickCmd->SetRange("Size>=0.");
  fGapThickCmd->SetUnitCategory("Length");  
  fGapThickCmd->AvailableForStates(G4State_PreInit,G4State_Idle);
  
  fSizeYZCmd = new G4UIcmdWithADoubleAndUnit("/N03/det/setSizeYZ",this);
  fSizeYZCmd->SetGuidance("Set tranverse size of the calorimeter");
  fSizeYZCmd->SetParameterName("Size",false);
  fSizeYZCmd->SetRange("Size>0.");
  fSizeYZCmd->SetUnitCategory("Length");    
  fSizeYZCmd->AvailableForStates(G4State_PreInit,G4State_Idle);
  
  fNbLayersCmd = new G4UIcmdWithAnInteger("/N03/det/setNbOfLayers",this);
  fNbLayersCmd->SetGuidance("Set number of layers.");
  fNbLayersCmd->SetParameterName("NbLayers",false);
  fNbLayersCmd->SetRange("NbLayers>0 && NbLayers<500");
  fNbLayersCmd->AvailableForStates(G4State_PreInit,G4State_Idle);

}

//....oooOO0OOooo........oooOO0OOooo........oooOO0OOooo........oooOO0OOooo......

DetectorMessenger::~DetectorMessenger()
{
  delete fNbLayersCmd;
  delete fAbsMaterCmd; delete fGapMaterCmd;
  delete fAbsThickCmd; delete fGapThickCmd;
  delete fSizeYZCmd;   
  delete fDetDir;
  delete fN03Dir;  
}

//....oooOO0OOooo........oooOO0OOooo........oooOO0OOooo........oooOO0OOooo......

void DetectorMessenger::SetNewValue(G4UIcommand* command,G4String newValue)
{ 
  if( command == fAbsMaterCmd )
   { fDetector->SetAbsorberMaterial(newValue);}
   
  if( command == fGapMaterCmd )
   { fDetector->SetGapMaterial(newValue);}
  
  if( command == fAbsThickCmd )
   { fDetector->SetAbsorberThickness(fAbsThickCmd
                                               ->GetNewDoubleValue(newValue));}
   
  if( command == fGapThickCmd )
   { fDetector->SetGapThickness(fGapThickCmd->GetNewDoubleValue(newValue));}
   
  if( command == fSizeYZCmd )
   { fDetector->SetCalorSizeYZ(fSizeYZCmd->GetNewDoubleValue(newValue));}
   
  if( command == fNbLayersCmd )
   { fDetector->SetNbOfLayers(fNbLayersCmd->GetNewIntValue(newValue));}
}

//....oooOO0OOooo........oooOO0OOooo........oooOO0OOooo........oooOO0OOooo......